Call 800-608-4100 to schedule your pool opening!
Do you need to have your pool opened or closed for the season? Blue Dolphin Pools Inc, will chemically treat and cover or uncover your pool.
SAVE! Schedule your opening and closing at the same time and receive $100 OFF! We offer three opening packages for you to choose from depending on your budget and the services you require:
Package ONE $500
Remove cover
Reassemble filters, ladders, pump
Vacuum and brush pool
Skim pool surface
Pressure wash deck up to 600 square feet
Start pool heater
Start up, check and adjust all systems
Test water and adjust chemical balance
Shock pool, treat w/algaecide
Backwash system
Return visit one week later to adjust pH
Package TWO $375
Remove cover
Reassemble filters, ladders, pump
Shock pool, treat w/algaecide
Vacuum and brush pool up to one hour
Skim pool surface
Test water and adjust chemical balance
Package THREE $300
Remove Cover
Reassemble filter and start
Test water and adjust chemical balance
Shock pool, treat w/algaecide
CLOSING PACKAGE $400
Lowering pool water level
Blowing water out of the lines
Plugging the lines
Turning off and dismantling equipment
Winterizing filter systems and pumps
Install winter chemicals and algaecides
Drain pumps and strainers
Install pool cover
Please fill out the pool opening and closing form below to sign up our services. Payment requested at time of service.
PACKAGE PRICES INCLUDE ALL CHEMICALS
WE ALSO OPEN AND CLOSE COMMERCIAL POOLS!
CALL OR SUBMIT OUR CONTACT FORM FOR A QUOTE
form mail
Please note that our service area for pool openings and closings consists of the following counties in Virginia: Prince William, Fauquier, Fairfax, Arlington, Loudon, Stafford and Culpeper.
FREE ESTIMATES
1-800-608-4100
|
 |
Servicing your pool and spa is more important than most people realize - especially if they've never owned a pool before. So when selecting a pool or spa company, consider the level of service they will offer later.
Try to fill your plaster pool as quickly as possible. If you stop filling and then resume later, the water will leave a ring in the plaster where you stopped.
Never completely drain your fiberglass swimming pool, especially if it is flaking or peeling in places. The pressure from the water on the walls of the pool keeps the fiberglass in place until a contractor can get there to repair it!
Always rinse your water testing materials in the water you are about to test. Using soap or tap water can leave a residue that may interfere with the test.
Always use fresh test strips when Ph testing your water, and take water samples at least 18 inches below the surface.
If you do need to add chemicals, wait to see whether they have the desired effect. Wait 15 minutes for liquid chlorine to circulate (with the pump running) and about 12 hours for the Ph to adjust.
When vacuuming your pool, move at a slow, steady pace. If you move too quickly, the current created by the vacuum head will stir up any dirt on the bottom of the pool.
Write the normal operating pressure directly on the filter with a waterproof marker, so you will never have to second-guess that number.
Leave the pool on the first sound of thunder, and wait 20 minutes after the last sound of thunder to let people back in the pool.
Never completely drain your fiberglass swimming pool, especially if it is flaking or peeling in places. The pressure from the water on the walls of the pool keeps the fiberglass in place until a contractor can get there to repair it!
|
Swimming Pool
Tile & Mosaics
 Blue Dolphin Pools -
Repair and Restoration Experts- Rated #1 in Customer Satisfaction! |
